Test Failed: "Ente[167 chars]for flow at 0.001 m/s in a 0.15 m diameter pipe is 1.50e+02." != "Ente[167 chars]for flow at 0.001 m/s in a 0.15 m diameter pipe is 1.50e+02.\n"
Enter the temperature in °C as 5, 20, or 50: 20
Enter the velocity of water in the pipe (m/s): 0.001
Enter the pipe's diameter (m): 0.15
- At 20.0°C, the Reynolds number for flow at 0.001 m/s in a 0.15 m diameter pipe is 1.50e+02.+ At 20.0°C, the Reynolds number for flow at 0.001 m/s in a 0.15 m diameter pipe is 1.50e+02.
? +
:
Hint:
Your output did not match the expected output. Double check the
formatting of output lines 1 through the end of your `main` function
when called as `main()` with entries=[20, 0.001, 0.15].
line |Input/Output Log:
----------------------------------------------------------------------
1 |Enter the temperature in °C as 5, 20, or 50: 20
2 |Enter the velocity of water in the pipe (m/s): 0.001
3 |Enter the pipe's diameter (m): 0.15
4 |At 20.0°C, the Reynolds number for flow at 0.001 m/s in a 0.15 m diameter pipe is 1.50e+02.